Custom Seatbelts And Toolboxes In Bundaberg
Get Custom Quote
Stewart & Sons Engineering – 7O Years of Craftsmanship & Safety
At Stewart & Sons Engineering, we take the safety of our community and our clients seriously. We offer the ability to purchase tailor-made, fully customised seat belts and restraints for your car, truck, or utility vehicle. Our custom engineering capabilities enable us to keep you safe and secure when on the road. It’s not enough for us to simply develop a line of safety features and products and to improve on the design of seat belts and restraints. In today’s world, the seats and anchor points vary hugely and can be so specific that they really require a focus on full customisation.
We can offer custom colours to brighten the look of your vehicle and show your personality, along with customised angles, measurements or brackets for your seatbelt. Better yet, all our work is street-legal and follows all legal requirements.
Maybe you’re interested in being an innovator and implementing a four-point seatbelt, we can help make that happen!
Custom Seatbelts – Built for Compliance and Safety
That deceptively simple strap you click in when you hop into your car or truck is actually is made up of a surprising amount of engineering detail. To keep you safe, these little belts made of just a few pounds of nylon and steel require a great deal of thought and engineering. Seat belts save many lives, and in fact, there is no other vehicle safety device that can boast as many lives saved as this seemingly simple three-point belt.
An engineer at Volvo invented the seatbelt in 1959 but today’s design features a great deal of differences to the original. Just as cars have advanced and roads have become more dangerous, seatbelts have needed to adapt and improve to match the increased danger. Even today, further design modifications are being made to keep the millions of drivers around the world as safe as possible.
The Importance of Safety-Compliant Seatbelts
Seatbelt Services We Offer
✔ Custom seatbelt replacements for worn or outdated systems
✔ Seatbelt modifications to increase or decrease seating capacity
✔ Compliance-approved installations for work vehicles, classic cars and performance vehicles
✔ Professional baby seat anchor point installation for child safety
✔ Heavy-duty and industrial seatbelts for commercial and mining vehicles
Every installation is performed with precision welding, secure anchoring and strict compliance checks, ensuring the integrity of the system remains intact.
Why Choose Our Custom Seatbelts?
Worn-out, damaged or improperly installed seatbelts can put lives at risk. Our engineering team ensures that every custom seatbelt installation meets Australian Safety Standards (AS/NZS 2596 & ISO 6683), providing peace of mind for drivers, passengers and fleet operators.
- Custom-fit solutions for classic cars, work vehicles & modified seating
- Compliant with Queensland transport regulations
- Seatbelt modifications for increased/decreased seating capacity
- Expert installation ensuring safety & durability
At Stewart & Sons Engineering, we take the safety of our community and our clients seriously. We offer the ability to purchase tailor-made, fully customised seat belts and restraints for your car, truck, or utility vehicle. Our custom engineering capabilities enable us to keep you safe and secure when on the road. It’s not enough for us to simply develop a line of safety features and products and to improve on the design of seat belts and restraints. In today’s world, the seats and anchor points vary hugely and can be so specific that they really require a focus on full customisation.
We can offer custom colours to brighten the look of your vehicle and show your personality, along with customised angles, measurements or brackets for your seatbelt. Better yet, all our work is entirely street legal and follows all legal requirements.
Maybe you’re interested in being an innovator and implementing a four-point seatbelt, we can help make that happen!
Custom Toolboxes – Secure, Durable and Built to Last
Benefits of Upgrading to Custom Toolboxes
Standard toolboxes often lack the durability and functionality needed for demanding jobs, leading to disorganised tools, exposure to harsh weather and increased theft risk. A custom-built solution ensures secure compartments, reinforced locks and weatherproof seals, preventing costly damage to valuable equipment.
A properly fitted toolbox reduces clutter, speeds up workflow and maximises vehicle space. With options in aluminium or steel, underbody or side-mounted designs, upgrading to a custom toolbox provides long-term reliability and ease of use.
Powder Coating & Protective Finishes for Toolboxes
A powder-coated toolbox isn’t just about looks—it’s a protective barrier against rust, corrosion and UV damage. Unlike traditional paint, powder coating forms a tough, even layer that resists scratches, chipping and chemical exposure, extending the lifespan of steel and aluminium toolboxes.
This finish also improves weather resistance, preventing moisture from compromising hinges, welds and structural integrity. Available in a variety of colours and textures, powder coating offers both durability and customisation, ensuring toolboxes maintain their strength and functionality in harsh job sites or off-road conditions.
Why Our Toolboxes Stand Out?
Whether you’re a tradie, off-roader, or fleet operator, a custom toolbox can keep your tools and gear secure, organised, and protected. We fabricate heavy-duty aluminium and steel toolboxes designed to endure Australia’s toughest conditions.
✔ Weather-resistant builds – Sealed edges, dustproof and waterproof options
✔ Lockable security – Heavy-duty latches, reinforced panels and tamper-proof designs
✔ Aluminium, steel or powder-coated finishes – Built for corrosion resistance
✔ Custom sizes and configurations – Underbody, side-mounted or full-width setups
✔ Gas struts and reinforced hinges – Smooth operation and long-term durability
A custom toolbox enhances efficiency, keeps tools within reach and prevents damage to expensive equipment.
Road Safety Laws & Seatbelt Requirements in Australia
Australian road laws mandate the use of seatbelts in all vehicles, with strict compliance required for modified, commercial and fleet vehicles. Under the Australian Design Rules (ADR 4/06), all seatbelts must be properly anchored, meet tensile strength requirements and be suitable for the vehicle type.
Failure to comply can lead to fines, demerit points and legal liability in an accident. Modifications affecting seating capacity, aftermarket belt replacements or child restraint installations must adhere to Queensland Department of Transport standards, ensuring vehicles remain safe, roadworthy and legally compliant.
Why Choose Stewart & Sons Engineering?
With seven decades of experience, we’re more than just fabricators – we’re problem solvers.
🔧 70+ Years of Engineering Excellence – Trusted by generations of Bundaberg locals
🔧 Family-Owned & Community-Focused – Proudly serving Bundaberg & beyond
🔧 Australian Safety Standards Compliance – Your safety is our priority
🔧 High-Quality Craftsmanship – Built to last, backed by expert engineering
Need a custom seatbelt or toolbox? Contact us today for a free consultation!
Why Choose Stewart & Sons Engineering?
With decades of experience in fabrication, welding and mechanical modifications, Stewart & Sons Engineering is trusted by vehicle owners, tradesmen and businesses across Bundaberg.
🔹 70+ Years of Expertise – Family-owned and operated since [insert year]
🔹 Fully Compliant with Australian Safety Standards – Legal and roadworthy solutions
🔹 High-Quality Craftsmanship – Precision-engineered seatbelts and toolboxes
🔹 Custom Solutions for Utes, Trucks and Work Vehicles – Practical, durable and safe
🔹 Serving Bundaberg and Surrounding Areas – Local experts with a strong reputation
Every project is completed with a focus on compliance, durability and usability, ensuring modifications are both safe and long-lasting.
Upgrade Your Vehicle with Safe and Secure Solutions
For custom seatbelts and toolboxes in Bundaberg, Stewart & Sons Engineering delivers professional installation, high-strength materials and compliance-approved solutions. Whether you’re upgrading a work vehicle, modifying a ute or ensuring child safety, trust a company with decades of experience and a commitment to quality.
📞 Call us today or request a free quote online.
Frequently Asked Questions
The price depends on size, material, locking mechanisms and additional features such as gas struts, powder coating or reinforced edges. Contact us for a quote based on your specifications.